EJOT USA

Sign up to our newsletter

EJOT drill bits 

For structural steel or wood substructures
• Special polished finish to ensure high drilling capacity in case of low drilling pressure
• Short chip flute
• Insensitive to breaking
• Long service life

 

Product #   

 

Product Name and description

9250408000 
EJOT Drill Bit HSS 5.5 x 175
Drill Bit Ø 5.5mm, length 6.890'' (for wood substructures)
 
9250423000
EJOT Drill Bit HSS 5.5 x 220
Drill Bit Ø 5.5mm, length 8.661'' (for wood substructures)
 
9250680175
EJOT Drill Bit HSS 6.8 x 175
Drill bit Ø 6.8mm, length 6.890'' (for metal substructures US steel gauge 16 ≤ US steel gauge 6)
 
9250510000
EJOT Drill Bit HSS 6.8 x 225
Drill bit Ø 6.8mm, length 8.858'' (for metal substructures US steel gauge 16 ≤ US steel gauge 6)
 
9250500000
EJOT Drill Bit HSS 7.0 x 175
Drill bit Ø 7.0mm, length 6.890'' (for metal substructures US steel gauge 5 ≤ 9/32'')
 
9250493000
EJOT Drill Bit HSS 7.0 x 225
Drill bit Ø 7.0mm, length 8.858'' (for metal substructures US steel gauge 5 ≤ 9/32'')
 
9250505000
EJOT Drill Bit HSS 7.2 x 175
Drill bit Ø 7.2mm, length 6.890'' (for metal substructures 19/64'' ≤ 25/64'')

9250494000
EJOT Drill Bit HSS 7.2 x 225
Drill bit Ø 7.2mm, length 8.858'' (for metal substructures 19/64'' ≤ 25/64")
 
9250507000
EJOT Drill Bit HSS 7.4 x 175 
Drill bit Ø 7.4mm, length 6.890'' (for metal substructures ≥ 13/32'')
 
9250497000
EJOT Drill Bit HSS 7.4 x 225
Drill bit Ø 7.4mm, length 8.858'' (for metal substructures ≥ 13/32'')

 

EJOT driver bit

Hexagon Driver Bit for EJOT Solar Fastening Systems with internal drive 
• External hexagon drive 5mm
• External Hexagon A/F 5-1/4’’/Cx25

Product #
Product Name and description
9250514025   
 
EJOT Driver Bit
A/F5-1/4" Form C x 25mm   
Driver Bit for EJOT Solar Fastening Systems


EJOT solar fastening adapter plate


The EJOT adapter plate in combination with the EJOT Solar Fastening System offers greater rigidity and force absorbing characteristics. 
Angled adapters (L-feet) are generally fastened parallel to the rails. In this situation, the fastening connection builds a hinge-like joint with the rail.  Since a roof generally has an inclination, a force occurs parallel to the roof surface. Using inappropriate fasteners or inadequate quantities, the entire rail system including the module can slide down and the sideway fastening connection cannot withstand this force.
Therefore, if the rail system is fastened onto an adapter plate, the entire system becomes more rigid and the problem of a potential tilting is less critical.
The EJOT Solar Fastening Adapter Plate (3.23'' x 1.18'' x 3/16'', hole M11) is made of grade 304 stainless steel. 

Product #    

Product Name and description
 
3100002400
EJOT Solar Fastening Adapter Plate
3.23'' x 1.18'' x 3/16'', hole M11


EJOT flashing kit for cables for PV installations 
 


The DEKTITE® flashing enables a perfect waterproofing of cable or pipe feed through roof or facade. Through the flexible rubber pleats thermal changes in length of the pipes or sheathing elements are not constricted. Fatigue fractures, which might occur with rigid cable/pipe feed throughs, are impossible with DEKTITE flashings. 

Advantages

• Long life
• Thermal stability: EPDM will withstand temperatures from -50 °C to +115 °C (-58 °F to 239 °F) with intermittent temperatures up to +150 °C (302 °F)
• Special solutions for higher temperatures upon request
• Low-temperature resistance: up to - 50 °C (-58 °F)
• Flexible adjustment
   - to different metal roof profiles
   - to pipe and cable bundle diameters up to 24.015’’ (610 mm)

Features
• Standard dimension for cable bundle or pipe diameters of up to 24.015’’ (610 mm)
• Weather resistant through the construction industry proven EPDM
• Unsusceptible to UV-radiation
• Adaptable to all roof profiles

Note:
When using the DEKTITE® flashings, amongst others, the specifications of the DIN 18807 or respective national guidelines and regulations have to be considered. Pipe/cable flashing may not be installed in the vicinity of horizontal or longitudinal joints.

EJOT PV Cable Flashing Installation Kit includes:

• 1 Dektite PV cable flashing DFE 0-35 (Cable bundle Ø 0-1.378'', roof pitch 0-60°, area 3.897x3.897'')
• 1 Cartridge of EJOPLAST joint sealant
• 1 EJOT bi-metal self-drilling screw JT3 kit


Joint Sealant

• EJOPLAST is a single-component universal sealant based on polycarboxylic acid copolymeric base
• EJOPLAST adheres to all conventional materials such as steel, aluminium, copper, brass, bitumen, concrete, masonry, plaster, plexiglas, tiles, roof tiles, etc. smooth, non-porous substructures can even be wet, while porous surfaces should be dry.
• EJOPLAST can be cleaned with standard cleaning agents, but not with solvents.
• EJOPLAST hardens through the evaporation of solvents and is impervious to water from the beginning, because it forms an immediate skin.
• The surface is adhesive-free after 20-30 minutes (depending on temperature), likewise immediately after contact with water (e.g. by planing).

Assembly instructions

     

1. Adjust flashing to the pipe or cable bundle       2. Adjust flashing to the profiled sheet and mark

     

3. Apply sealant                                                     4. Adjust flashing to the shape of the roof profile

     

5. Fasten flashing with EJOT self-drilling screws